Solaris ZFS Administration Guide
Previous Next

Document Information

Preface

1.  Solaris ZFS File System (Introduction)

2.  Getting Started With ZFS

3.  ZFS and Traditional File System Differences

4.  Managing ZFS Storage Pools

5.  Managing ZFS File Systems

6.  Working With ZFS Snapshots and Clones

7.  Using ACLs to Protect ZFS Files

New Solaris ACL Model

Setting ACLs on ZFS Files

Setting and Displaying ACLs on ZFS Files in Verbose Format

Setting and Displaying ACLs on ZFS Files in Compact Format

8.  ZFS Delegated Administration

9.  ZFS Advanced Topics

10.  ZFS Troubleshooting and Data Recovery

Index

Setting and Displaying ACLs on ZFS Files in Verbose Format

You can use the chmod command to modify ACLs on ZFS files. The following chmod syntax for modifying ACLs uses acl-specification to identify the format of the ACL. For a description of acl-specification, see Syntax Descriptions for Setting ACLs.

  • Adding ACL entries

    • Adding an ACL entry for a user

      % chmod A+acl-specification filename

    • Adding an ACL entry by index-ID

      % chmod Aindex-ID+acl-specification filename

      This syntax inserts the new ACL entry at the specified index-ID location.

  • Replacing an ACL entry

    % chmod Aindex-ID=acl-specification filename
    % chmod A=acl-specification filename

  • Removing ACL entries

    • Removing an ACL entry by index-ID

      % chmod Aindex-ID- filename

    • Removing an ACL entry by user

      % chmod A-acl-specification filename

    • Removing all non-trivial ACEs from a file

      % chmod A- filename

Verbose ACL information is displayed by using the ls -v command. For example:

# ls -v file.1
-rw-r--r--   1 root     root      206663 Feb 16 11:00 file.1
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:write_data/append_data/execute:deny
     3:group@:read_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     5:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

For information about using the compact ACL format, see Setting and Displaying ACLs on ZFS Files in Compact Format.

Example 7-1 Modifying Trivial ACLs on ZFS Files

This section provides examples of setting and displaying trivial ACLs.

In the following example, a trivial ACL exists on file.1:

# ls -v file.1
-rw-r--r--   1 root     root      206663 Feb 16 11:00 file.1
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:write_data/append_data/execute:deny
     3:group@:read_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     5:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

In the following example, write_data permissions are granted for group@.

# chmod A2=group@:append_data/execute:deny file.1
# chmod A3=group@:read_data/write_data:allow file.1
# ls -v file.1
-rw-rw-r--   1 root     root           206663 May  3 16:36 file.1
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:append_data/execute:deny
     3:group@:read_data/write_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     5:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

In the following example, permissions on file.1 are set back to 644.

# chmod 644 file.1
# ls -v file.1
-rw-r--r--   1 root     root           206663 May  3 16:36 file.1
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:write_data/append_data/execute:deny
     3:group@:read_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     5:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow
Example 7-2 Setting Non-Trivial ACLs on ZFS Files

This section provides examples of setting and displaying non-trivial ACLs.

In the following example, read_data/execute permissions are added for the user gozer on the test.dir directory.

# chmod A+user:gozer:read_data/execute:allow test.dir
# ls -dv test.dir
drwxr-xr-x+  2 root     root           2 Feb 16 11:12 test.dir
     0:user:gozer:list_directory/read_data/execute:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

In the following example, read_data/execute permissions are removed for user gozer. 

# chmod A0- test.dir
# ls -dv test.dir
drwxr-xr-x   2 root     root           2 Feb 16 11:12 test.dir
     0:owner@::deny
     1:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     2:group@:add_file/write_data/add_subdirectory/append_data:deny
     3:group@:list_directory/read_data/execute:allow
     4:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     5:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow
Example 7-3 ACL Interaction With Permissions on ZFS Files

These ACL examples illustrate the interaction between setting ACLs and then changing the file or directory's permission bits.

In the following example, a trivial ACL exists on file.2:

# ls -v file.2
-rw-r--r--   1 root     root        2703 Feb 16 11:16 file.2
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:write_data/append_data/execute:deny
     3:group@:read_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     5:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

In the following example, ACL allow permissions are removed from everyone@.

# chmod A5- file.2
# ls -v file.2
-rw-r-----   1 root     root        2703 Feb 16 11:16 file.2
     0:owner@:execute:deny
     1:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     2:group@:write_data/append_data/execute:deny
     3:group@:read_data:allow
     4:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny

In this output, the file's permission bits are reset from 655 to 650. Read permissions for everyone@ have been effectively removed from the file's permissions bits when the ACL allow permissions are removed for everyone@.

In the following example, the existing ACL is replaced with read_data/write_data permissions for everyone@.

# chmod A=everyone@:read_data/write_data:allow file.3
# ls -v file.3
-rw-rw-rw-+  1 root     root        1532 Feb 16 11:18 file.3
     0:everyone@:read_data/write_data:allow

In this output, the chmod syntax effectively replaces the existing ACL with read_data/write_data:allow permissions to read/write permissions for owner, group, and everyone@. In this model, everyone@ specifies access to any user or group. Since no owner@ or group@ ACL entry exists to override the permissions for owner and group, the permission bits are set to 666.

In the following example, the existing ACL is replaced with read permissions for user gozer.

# chmod A=user:gozer:read_data:allow file.3
# ls -v file.3
----------+  1 root     root        1532 Feb 16 11:18 file.3
     0:user:gozer:read_data:allow

In this output, the file permissions are computed to be 000 because no ACL entries exist for owner@, group@, or everyone@, which represent the traditional permission components of a file. The owner of the file can resolve this problem by resetting the permissions (and the ACL) as follows:

# chmod 655 file.3
# ls -v file.3
-rw-r-xr-x+  1 root     root           0 Mar  8 13:24 file.3
     0:user:gozer::deny
     1:user:gozer:read_data:allow
     2:owner@:execute:deny
     3:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     4:group@:write_data/append_data:deny
     5:group@:read_data/execute:allow
     6:everyone@:write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:deny
     7:everyone@:read_data/read_xattr/execute/read_attributes/read_acl
         /synchronize:allow
Example 7-4 Restoring Trivial ACLs on ZFS Files

You can use the chmod command to remove all non-trivial ACLs on a file or directory.

In the following example, 2 non-trivial ACEs exist on test5.dir.

# ls -dv test5.dir
drwxr-xr-x+  2 root     root           2 Feb 16 11:23 test5.dir
     0:user:gozer:read_data:file_inherit:deny
     1:user:lp:read_data:file_inherit:deny
     2:owner@::deny
     3:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     4:group@:add_file/write_data/add_subdirectory/append_data:deny
     5:group@:list_directory/read_data/execute:allow
     6:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     7:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

In the following example, the non-trivial ACLs for users gozer and lp are removed. The remaining ACL contains the six default values for owner@, group@, and everyone@.

# chmod A- test5.dir
# ls -dv test5.dir
drwxr-xr-x   2 root     root           2 Feb 16 11:23 test5.dir
     0:owner@::deny
     1:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     2:group@:add_file/write_data/add_subdirectory/append_data:deny
     3:group@:list_directory/read_data/execute:allow
     4:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     5:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

Setting ACL Inheritance on ZFS Files in Verbose Format

You can determine how ACLs are inherited or not inherited on files and directories. By default, ACLs are not propagated. If you set an non-trivial ACL on a directory, the ACL is not inherited by any subsequent directory. You must specify the inheritance of an ACL on a file or directory.

In addition, two ACL properties are provided that can be set globally on file systems: aclinherit and aclmode. By default, aclinherit is set to secure and aclmode is set to groupmask.

For more information, see ACL Inheritance.

Example 7-5 Default ACL Inheritance

By default, ACLs are not propagated through a directory structure.

In the following example, an non-trivial ACE of read_data/write_data/execute is applied for user gozer on test.dir.

# chmod A+user:gozer:read_data/write_data/execute:allow test.dir
# ls -dv test.dir
drwxr-xr-x+  2 root     root           2 Feb 17 14:45 test.dir
     0:user:gozer:list_directory/read_data/add_file/write_data/execute:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

If a test.dir subdirectory is created, the ACE for user gozer is not propagated. User gozer would only have access to sub.dir if the permissions on sub.dir granted him access as the file owner, group member, or everyone@.

# mkdir test.dir/sub.dir
# ls -dv test.dir/sub.dir
drwxr-xr-x   2 root     root           2 Feb 17 14:46 test.dir/sub.dir
     0:owner@::deny
     1:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     2:group@:add_file/write_data/add_subdirectory/append_data:deny
     3:group@:list_directory/read_data/execute:allow
     4:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     5:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow
Example 7-6 Granting ACL Inheritance on Files and Directories

This series of examples identify the file and directory ACEs that are applied when the file_inherit flag is set.

In the following example, read_data/write_data permissions are added for files in the test.dir directory for user gozer so that he has read access on any newly created files.

# chmod A+user:gozer:read_data/write_data:file_inherit:allow test2.dir
# ls -dv test2.dir
drwxr-xr-x+  2 root     root           2 Feb 17 14:47 test2.dir
     0:user:gozer:read_data/write_data:file_inherit:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

In the following example, user gozer's permissions are applied on the newly created test2.dir/file.2 file. The ACL inheritance granted, read_data:file_inherit:allow, means user gozer can read the contents of any newly created file.

# touch test2.dir/file.2
# ls -v test2.dir/file.2
-rw-r--r--+  1 root     root           0 Feb 17 14:49 test2.dir/file.2
     0:user:gozer:write_data:deny
     1:user:gozer:read_data/write_data:allow
     2:owner@:execute:deny
     3:owner@:read_data/write_data/append_data/write_xattr/write_attributes+
         /write_acl/write_owner:allow
     4:group@:write_data/append_data/execute:deny
     5:group@:read_data:allow
     6:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     7:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

Because the aclmode for this file is set to the default mode, groupmask, user gozer does not have write_data permission on file.2 because the group permission of the file does not allow it.

Note the inherit_only permission, which is applied when the file_inherit or dir_inherit flags are set, is used to propagate the ACL through the directory structure. As such, user gozer is only granted or denied permission from everyone@ permissions unless he is the owner of the file or a member of the owning group of the file. For example:

# mkdir test2.dir/subdir.2
# ls -dv test2.dir/subdir.2
drwxr-xr-x+  2 root     root           2 Feb 17 14:50 test2.dir/subdir.2
     0:user:gozer:list_directory/read_data/add_file/write_data:file_inherit
         /inherit_only:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

The following series of examples identify the file and directory ACLs that are applied when both the file_inherit and dir_inherit flags are set.

In the following example, user gozer is granted read, write, and execute permissions that are inherited for newly created files and directories.

# chmod A+user:gozer:read_data/write_data/execute:file_inherit/dir_inherit:allow test3.dir
# ls -dv test3.dir
drwxr-xr-x+  2 root     root           2 Feb 17 14:51 test3.dir
     0:user:gozer:list_directory/read_data/add_file/write_data/execute
         :file_inherit/dir_inherit:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow
# touch test3.dir/file.3
# ls -v test3.dir/file.3
-rw-r--r--+  1 root     root           0 Feb 17 14:53 test3.dir/file.3
     0:user:gozer:write_data/execute:deny
     1:user:gozer:read_data/write_data/execute:allow
     2:owner@:execute:deny
     3:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     4:group@:write_data/append_data/execute:deny
     5:group@:read_data:allow
     6:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     7:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow
# mkdir test3.dir/subdir.1
# ls -dv test3.dir/subdir.1
drwxr-xr-x+  2 root     root           2 May  4 15:00 test3.dir/subdir.1
     0:user:gozer:list_directory/read_data/add_file/write_data/execute
         :file_inherit/dir_inherit/inherit_only:allow
     1:user:gozer:add_file/write_data:deny
     2:user:gozer:list_directory/read_data/add_file/write_data/execute:allow
     3:owner@::deny
     4:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     5:group@:add_file/write_data/add_subdirectory/append_data:deny
     6:group@:list_directory/read_data/execute:allow
     7:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     8:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

In these examples, because the permission bits of the parent directory for group@ and everyone@ deny write and execute permissions, user gozer is denied write and execute permissions. The default aclmode property is secure, which means that write_data and execute permissions are not inherited.

In the following example, user gozer is granted read, write, and execute permissions that are inherited for newly created files, but are not propagated to subsequent contents of the directory.

# chmod A+user:gozer:read_data/write_data/execute:file_inherit/no_propagate:allow test4.dir
# ls -dv test4.dir
drwxr-xr-x+  2 root     root           2 Feb 17 14:54 test4.dir
     0:user:gozer:list_directory/read_data/add_file/write_data/execute
         :file_inherit/no_propagate:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

As the following example illustrates, when a new subdirectory is created, user gozer's read_data/write_data/execute permission for files are not propagated to the new sub4.dir directory.

# mkdir test4.dir/sub4.dir
# ls -dv test4.dir/sub4.dir
drwxr-xr-x   2 root     root           2 Feb 17 14:57 test4.dir/sub4.dir
     0:owner@::deny
     1:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     2:group@:add_file/write_data/add_subdirectory/append_data:deny
     3:group@:list_directory/read_data/execute:allow
     4:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     5:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

As the following example illustrates, gozer's read_data/write_data/execute permission for files is propagated to the newly created file.

# touch test4.dir/file.4
# ls -v test4.dir/file.4
-rw-r--r--+  1 root     root           0 May  4 15:02 test4.dir/file.4
     0:user:gozer:write_data/execute:deny
     1:user:gozer:read_data/write_data/execute:allow
     2:owner@:execute:deny
     3:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     4:group@:write_data/append_data/execute:deny
     5:group@:read_data:allow
     6:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     7:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow
Example 7-7 ACL Inheritance With ACL Mode Set to Passthrough

If the aclmode property on the tank/cindy file system is set to passthrough, then user gozer would inherit the ACL applied on test4.dir for the newly created file.4 as follows:

# zfs set aclmode=passthrough tank/cindy
# touch test4.dir/file.4
# ls -v test4.dir/file.4
-rw-r--r--+  1 root     root           0 Feb 17 15:15 test4.dir/file.4
     0:user:gozer:read_data/write_data/execute:allow
     1:owner@:execute:deny
     2:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     3:group@:write_data/append_data/execute:deny
     4:group@:read_data:allow
     5:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     6:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow

This output illustrates that the read_data/write_data/execute:allow:file_inherit/dir_inherit ACL that was set on the parent directory, test4.dir, is passed through to user gozer.

Example 7-8 ACL Inheritance With ACL Mode Set to Discard

If the aclmode property on a file system is set to discard, then ACLs can potentially be discarded when the permission bits on a directory change. For example:

# zfs set aclmode=discard tank/cindy
# chmod A+user:gozer:read_data/write_data/execute:dir_inherit:allow test5.dir
# ls -dv test5.dir
drwxr-xr-x+  2 root     root           2 Feb 16 11:23 test5.dir
     0:user:gozer:list_directory/read_data/add_file/write_data/execute
         :dir_inherit:allow
     1:owner@::deny
     2:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     3:group@:add_file/write_data/add_subdirectory/append_data:deny
     4:group@:list_directory/read_data/execute:allow
     5:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     6:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

If, at a later time, you decide to tighten the permission bits on a directory, the non-trivial ACL is discarded. For example:

# chmod 744 test5.dir
# ls -dv test5.dir
drwxr--r--   2 root     root           2 Feb 16 11:23 test5.dir
     0:owner@::deny
     1:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     2:group@:add_file/write_data/add_subdirectory/append_data/execute:deny
     3:group@:list_directory/read_data:allow
     4:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /execute/write_attributes/write_acl/write_owner:deny
     5:everyone@:list_directory/read_data/read_xattr/read_attributes/read_acl
         /synchronize:allow
Example 7-9 ACL Inheritance With ACL Inherit Mode Set to Noallow

In the following example, two non-trivial ACLs with file inheritance are set. One ACL allows read_data permission, and one ACL denies read_data permission. This example also illustrates how you can specify two ACEs in the same chmod command.

# zfs set aclinherit=nonallow tank/cindy
# chmod A+user:gozer:read_data:file_inherit:deny,user:lp:read_data:file_inherit:allow test6.dir
# ls -dv test6.dir
drwxr-xr-x+  2 root     root           2 May  4 14:23 test6.dir
     0:user:gozer:read_data:file_inherit:deny
     1:user:lp:read_data:file_inherit:allow
     2:owner@::deny
     3:owner@:list_directory/read_data/add_file/write_data/add_subdirectory
         /append_data/write_xattr/execute/write_attributes/write_acl
         /write_owner:allow
     4:group@:add_file/write_data/add_subdirectory/append_data:deny
     5:group@:list_directory/read_data/execute:allow
     6:everyone@:add_file/write_data/add_subdirectory/append_data/write_xattr
         /write_attributes/write_acl/write_owner:deny
     7:everyone@:list_directory/read_data/read_xattr/execute/read_attributes
         /read_acl/synchronize:allow

As the following example shows, when a new file is created, the ACL that allows read_data permission is discarded.

# touch test6.dir/file.6
# ls -v test6.dir/file.6
-rw-r--r--+  1 root     root           0 May  4 13:44 test6.dir/file.6
     0:user:gozer:read_data:deny
     1:owner@:execute:deny
     2:owner@:read_data/write_data/append_data/write_xattr/write_attributes
         /write_acl/write_owner:allow
     3:group@:write_data/append_data/execute:deny
     4:group@:read_data:allow
     5:everyone@:write_data/append_data/write_xattr/execute/write_attributes
         /write_acl/write_owner:deny
     6:everyone@:read_data/read_xattr/read_attributes/read_acl/synchronize
         :allow
Previous Next