System Administration Guide: Network Services
Previous Next

Document Information

Preface

Part I Network Services Topics

1.  Network Service (Overview)

2.  Managing Web Cache Servers

3.  Time-Related Services

Part II Accessing Network File Systems Topics

4.  Managing Network File Systems (Overview)

5.  Network File System Administration (Tasks)

6.  Accessing Network File Systems (Reference)

Part III SLP Topics

7.  SLP (Overview)

8.  Planning and Enabling SLP (Tasks)

9.  Administering SLP (Tasks)

10.  Incorporating Legacy Services

11.  SLP (Reference)

SLP Status Codes

SLP Message Types

Part IV Mail Services Topics

12.  Mail Services (Overview)

13.  Mail Services (Tasks)

14.  Mail Services (Reference)

Part V Serial Networking Topics

15.  Solaris PPP 4.0 (Overview)

16.  Planning for the PPP Link (Tasks)

17.  Setting Up a Dial-up PPP Link (Tasks)

18.  Setting Up a Leased-Line PPP Link (Tasks)

19.  Setting Up PPP Authentication (Tasks)

20.  Setting Up a PPPoE Tunnel (Tasks)

21.  Fixing Common PPP Problems (Tasks)

22.  Solaris PPP 4.0 (Reference)

23.  Migrating From Asynchronous Solaris PPP to Solaris PPP 4.0 (Tasks)

24.  UUCP (Overview)

25.  Administering UUCP (Tasks)

26.  UUCP (Reference)

Part VI Working With Remote Systems Topics

27.  Working With Remote Systems (Overview)

28.  Administering the FTP Server (Tasks)

29.  Accessing Remote Systems (Tasks)

Part VII Monitoring Network Services Topics

30.  Monitoring Network Performance (Tasks)

Glossary

Index
Chapter 11

SLP (Reference)

This chapter describes the SLP status codes and message types. SLP message types are listed with the abbreviations and function codes. SLP status codes are shown with descriptions and function codes that are used to indicate that a request is received (code 0), or that the receiver is busy.

Note - The SLP daemon (slpd) returns status codes for unicast messages only.
Previous Next