System Administration Guide: IP Services
Previous Next

IPv6 Planning (Task Maps)

Complete the tasks in the next task map in sequential order to accomplish the planning tasks necessary for IPv6 deployment.

Task

Description

For Instructions

1. Prepare your hardware to support IPv6.

Ensure that your hardware can be upgraded to IPv6.

Preparing the Network Topology for IPv6 Support

2. Get an ISP that supports IPv6.

Ensure that your current ISP supports IPv6. Otherwise, find an ISP who can support IPv6. You can use two ISPs, one ISP for IPv6 and one for ISP IPv4 communications.

3. Ensure that your applications are IPv6 ready.

Verify that your applications can run in an IPv6 environment.

How to Prepare Network Services for IPv6 Support

4. Get a site prefix.

Obtain a 48-bit site prefix for your site from your ISP or from the nearest RIR.

Obtaining a Site Prefix

5. Create a subnet addressing plan.

You need to plan the overall IPv6 network topology and addressing scheme before you can configure IPv6 on the various nodes in your network.

Creating a Numbering Scheme for Subnets

6. Design a plan for tunnel usage.

Determine which routers should run tunnels to other subnets or external networks.

Planning for Tunnels in the Network Topology

7. Create an addressing plan for entities on the network.

Your plan for addressing servers, routers, and hosts should be in place before IPv6 configuration.

Creating an IPv6 Addressing Plan for Nodes

8. Develop an IPv6 security policy.

Investigate IP Filter, IP security architecture (IPsec), Internet Key Exchange (IKE), and other Solaris security features as you develop an IPv6 security policy.

Part III, IP Security

9. (Optional) Set up a DMZ.

For security purposes, you need an addressing plan for the DMZ and its entities before you configure IPv6.

Security Considerations for the IPv6 Implementation

10. Enable the nodes to support IPv6.

Configure IPv6 on all routers and hosts.

IPv6 Router Configuration (Task Map)

11. Turn on network services.

Make sure that existing servers can support IPv6.

Major TCP/IP Administrative Tasks (Task Map)

12. Update name servers for IPv6 support.

Make sure that DNS, NIS, and LDAP servers are updated with the new IPv6 addresses.

Configuring Name Service Support for IPv6

Previous Next