Document Information
Preface
Part I Planning to Install Over the Network
1. Where to Find Solaris Installation Planning Information
2. Preconfiguring System Configuration Information (Tasks)
3. Preconfiguring With a Naming Service or DHCP
Part II Installing Over a Local Area Network
4. Installing From the Network (Overview)
5. Installing From the Network With DVD Media (Tasks)
6. Installing From the Network With CD Media (Tasks)
7. Installing Over the Network (Examples)
8. Installing From the Network (Command Reference)
Part III Installing Over a Wide Area Network
9. WAN Boot (Overview)
10. Preparing to Install With WAN Boot (Planning)
11. Installing With WAN Boot (Tasks)
12. SPARC: Installing With WAN Boot (Tasks)
13. SPARC: Installing With WAN Boot (Examples)
14. WAN Boot (Reference)
Part IV Appendixes
A. Troubleshooting (Tasks)
B. Installing or Upgrading Remotely (Tasks)
SPARC: Using the Solaris Installation Program to Install or Upgrade From a Remote DVD-ROM or CD-ROM
SPARC: To Install or Upgrade From a Remote DVD-ROM and CD-ROM
Glossary
Index
|
M
N
- name server, preconfiguring, Choosing a Naming Service
- names/naming
- host name, To Add Systems to Be Installed From the Network With add_install_client (CDs)
- system configuration file for WAN boot installation, To Create the System Configuration File
- system platform name determination, Network Installation Commands
- naming service, preconfiguring, Choosing a Naming Service
- net device alias, checking and resetting
- To Check the net Device Alias in the Client OBP
- Check the net Device Alias in OBP
- netmask, preconfiguring, Choosing a Naming Service
- network-boot-arguments OBP variables
- setting in WAN boot installations, To Perform an Interactive WAN Boot Installation
- syntax, OBP Commands
- network installation
- See also WAN boot installation
- description, Network Installation Introduction
- preparing, Network Installation Introduction
- requirements, Required Servers for Network Installation
- using CD media
- SPARC: Creating a SPARC Install Server With CD Media
- x86: Creating an x86 Install Server With CD Media
- Creating a Boot Server on a Subnet With a CD Image
- using cross-platform media, Creating a Cross-Platform Install Server for CD Media
- using DVD media
- Creating an Install Server With DVD Media
- Creating a Boot Server on a Subnet With a DVD Image
- using PXE, x86: Overview of Booting and Installing Over the Network With PXE
- WAN boot installation example, SPARC: Installing With WAN Boot (Examples)
- network interface, preconfiguring, Choosing a Naming Service
- nistbladm command
- To Preconfigure the Locale Using NIS+
- To Preconfigure the Locale Using NIS+
- No carrier - transceiver cable problem message, Booting From Media, Error Messages
- Not a UFS filesystem message, Booting From Media, Error Messages
- nvalias command, syntax, OBP Commands
O
P
- -p option of check script, To Create the rules File
- permissions, /etc/netboot directory, To Create the /etc/netboot Hierarchy on the WAN Boot Server
- PKCS#12 file
- preparing for WAN boot installation, (Optional) Use Private Key and Certificate for Client Authentication
- requirements for WAN boot installation, Digital Certificate Requirements
- planning
- WAN boot installation
- information required to install, Gathering Information for WAN Boot Installations
- server layout, Server Configuration Options
- sharing configuration and security files, Sharing Security and Configuration Information in the /etc/netboot Directory
- storing configuration and security files, Storing Configuration and Security Information in the /etc/netboot Hierarchy
- storing installation files, Storing Installation and Configuration Files in the Document Root Directory
- storing wanboot-cgi program, Storing the wanboot-cgi Program
- system requirements, WAN Boot Requirements and Guidelines
- web server requirements, Web Server Software Requirements and Guidelines
- platforms
- install server setup, To Add Systems to Be Installed From the Network With add_install_client (CDs)
- name determination, Network Installation Commands
- pointing device, preconfiguring, Choosing a Naming Service
- Power Management, SPARC: Preconfiguring Power Management Information
- Preboot Execution Environment (PXE)
- BIOS setup requirements
- x86: To Install the Client Over the Network With GRUB (DVD)
- x86: To Install the Client Over the Network With GRUB (CDs)
- description, x86: What is PXE?
- guidelines, x86: Guidelines for Booting With PXE
- preconfiguring system configuration information
- advantages, Advantages of Preconfiguring System Configuration Information
- choosing a method, Choosing a Naming Service
- with DHCP, Preconfiguring System Configuration Information With the DHCP Service (Tasks)
- Power Management, SPARC: Preconfiguring Power Management Information
- using a naming service
- Choosing a Naming Service
- Preconfiguring With the Naming Service
- using sysidcfg file, Choosing a Naming Service
- preparing for installation
- client for WAN boot installation, Preparing the Client for a WAN Boot Installation
- preconfiguring system information
- advantages, Advantages of Preconfiguring System Configuration Information
- methods, Choosing a Naming Service
WAN boot installation, Installing With WAN Boot (Tasks)
- primary document directory, See document root directory
- printenv command, checking for WAN boot support, Check the Client OBP for WAN Boot Support
- privacy issues with WAN boot installations, WAN Boot Security Limitations
- processors, WAN boot installation requirements, WAN Boot Requirements and Guidelines
- profiles
- examples
- WAN boot installation, To Create the Profile
naming, To Create the Profile
- protecting data during WAN boot installation
- with encryption key, Encrypting Data With Encryption Keys
- with hashing key, Checking the Integrity of Data With a Hashing Key
- with HTTPS, Protecting Data by Using HTTPS
- PXE (Preboot Execution Environment)
- BIOS setup requirements
- x86: To Install the Client Over the Network With GRUB (DVD)
- x86: To Install the Client Over the Network With GRUB (CDs)
- description, x86: What is PXE?
- guidelines, x86: Guidelines for Booting With PXE
R
- requirements
- network installation, servers, Required Servers for Network Installation
- WAN boot installation, WAN Boot Requirements and Guidelines
- reset command, Network Installation Commands
- resetting display and terminal after I/O interrupts, Network Installation Commands
- resolve_hosts parameter, wanboot.conf File Parameters and Syntax
- root_file parameter, wanboot.conf File Parameters and Syntax
- root password, preconfiguring, Choosing a Naming Service
- root_server parameter, wanboot.conf File Parameters and Syntax
- router-ip variable, To Perform a Noninteractive WAN Boot Installation
- RPC Timed out message, Booting From the Network, Error Messages
- rules, validating for WAN boot installation, To Create the rules File
- rules file, validating for WAN boot installation, To Create the rules File
|